Structure
Versions with metal leg and with wooden paneled leg. The metal one uses an oval-section steel tubular welded at the top to a steel plate that folds below the top.
The same metal plate is fixed above the paneled leg maintaining the same aesthetic proposed by the program. On the ground, a steel cap closes the tube by holding the threaded foot for “bubble” of the top at the end of the assembly. The paneled leg, on the other hand, has ground plates designed for the insertion of the leveling feet. All metal structures are hot-painted (200 °), in an oven with epoxypolyester powders.
work plan
Worktops and paneled legs in eco-wood thickness 40 mm. The work surfaces in particular are rounded edge with a 45 mm curvature radius.
Fitting
Chest of drawers and service furniture made entirely of 18 mm thick melamine and all the components are thrusts together.
The drawers can be with two or three drawers, these slide on simple extraction type guides equipped with metal ball bearings, covered in nylon.
Each drawer is equipped with a silver-colored plastic handle in the shape of a bow.
It is equipped at the base with four swivel wheels Ø50.
The chest of drawers is equipped with a Yale lock for simultaneous closing of the drawers and a double folding key for anti-accident purposes.
The service cabinet can be composed of two or 3 modular elements, specifically there is a chest of drawers module with two or three drawers, a pc pota module and a module with right or left door; These elements, to form the service cabinet, is finished with a unique top and backrest and resting on fixed feet of 8 cm high or on Ø60 wheels.
The elements indicated above can compose an additional element at the desk with the plan.
All drawer units and service cabinet elements are provided with a double folding key lock.
The series is equipped with extensions with a paneled leg, on legs or with a supporting element (elements of the service cabinet), square meeting tables (top thickness 28 mm) 120×120 cm and 160×160 cm, circular diameter 80, 100 and 120, low waiting tables height 45 cm (40 mm thick top) and high 105 cm (40 mm thick top).
Boiserie: consisting of a perimeter and intermediate aluminum frame to the panels that can be mounted in support of the floor or fixed to the wall at a predetermined height (90 cm – maximum recommended height 225 cm). The frame is always anodized steel dyed, while the infill panels are in eco-wood. The aluminum joints between the panels allow the insertion of shelves that can be in glass (acidized or transparent) and in chipboard.
