Dressing room structure
Load-bearing structure: 1, 2 and 3-seater monobloc.
The various parts are structured by steel sheet elements (UNI 5866) 6/10 printed thickness.
The metal shelf is equipped at the bottom with a hanger holder rod and side hooks.
ante
In 6/10 thick molded sheet metal they are reinforced on the inside by an anti-switching rib, and are equipped with ventilation slots and an umbrella stand with a plastic drip tray.
The doors are mounted on an internal hinge with an exposed pin to allow the opening at 180 °, they are equipped with a lock.
The finishing passage is carried out with phosphos-greasing, drying, automatic application of epoxypolyester powders and passage in the oven for crosslinking at 180 ° C.
Benches structure
Supporting structure: monobloc made with welded metal tubular. Available in two sizes of length: single (100 cm) and double (200 cm).
The seat is made with wooden strips fixed by means of screws to the metal structure.
The coat hanger that is completed with an upper bag compartment can be attached to the base structure.
