Pressed sheet-steel having a separate plinth with levelling feet.
Back and top: 8/10 mm thick steel sheet.
Sides are made up of several welded components: two 8/10 mm thick pressed sheet-steel sides. The double side combination is reinforced by an additional steel sheet (8/10 mm thick). The side has double rack of 9,8×9,8 mm slots, which are placed at a 40 mm center distance for the entire side’s height. The slots are used to accommodate shelf supports.
Back: two 8/10 mm thick pressed sheet-steel sides. It is fixed to the other components by 4,2×9,5 screws.
Plinth: 8/10 mm thick pressed sheet-steel, and it’s set up for the placement of 4 levelling feet.
Shelves: 8/10 mm thick pressed sheet-steel with folds to reinforceeach shelf. They are supported by two 8/10 mm thick pressed sheet-steel supports. Each shelf has a scope of 80 kg with a uniformly distributed weight. If there is a need to increase the scope, reinforcements may be applied (8/10 mm thick galvanised sheet-steel accessories).
All metal parts are painted with epoxy polyester powders, polymerized in an oven at 200 ºC.
Movable divider for shelf (H 16/26 cm). Inclined display shelf (38°) is hinged at the top and it allows to store and hide documents.
Top’s finish: ABS edged 8/10 mm thick top, and it’s available in steel or melamine.