metal chest of drawers on wheels
In 15/10 thick metal to which the sides and back are welded in folded and printed steel sheet 8/10 thickness.
The drawer casing is made of molded steel sheet like the drawer facade. The top hat for the monobloc shell is made of 10/10 thick steel sheet and reinforced at the top. The drawers slide on partial extraction roller guides on normal and full-extraction ball drawers. Total drawer handle with side handle.
Complete with four Ø30 shank swivel wheels with pin fixed to the chest of drawers thanks to inserts present in the shell; 2 wheels are equipped with brake. The chest of drawers is equipped with a Yale lock type central locking system with an anti tilt system as standard.
The lock is equipped with a folding key (for accident prevention purposes) in duplicate each equipped with a plastic lock protection shell.
Metal chest of drawers with melamine drawer fronts on wheels
Structure consisting of a monobloc casing, suitably folded and welded, in steel sheet. The top finishing in metal has a radial front edge.
It is equipped at the base with four swivel wheels Ø30. The chest of drawers is available with three A6 drawers and there is a stationery drawer with an internal plastic tank. The drawer casing is designed for the housing of transverse internal separators. The fronts of the drawers are made of 18 mm thick melamine, each equipped with a silver-colored plastic arch handle. The drawers slide on simple extraction type guides, in thick molded steel sheet, equipped with metal ball bearings, coated in nylon. The chest of drawers is equipped with a Yale lock with a double folding key for simultaneous closing of the drawers and an anti-overturning safety device. The structure is painted with polymerized epoxy polyester powders in an oven at 200 ° C.
“Mini” metal chest of drawers with 2 or 3 drawers on wheels
Consisting of a monobloc casing, suitably folded and welded, in steel sheet. It is equipped at the base with four swivel wheels Ø30. The drawers slide on simple extraction type guides, in high-thickness molded steel sheet, equipped with metal ball bearings, covered in nylon. The chest of drawers is available in two solutions, with metal fronts or with 18 mm thick melamine drawer fronts
with ABS edge. The chest of drawers is equipped with a Yale lock for the simultaneous closure of the drawers with a double folding key for accident prevention purposes and an anti-overturning safety device.
The structure is painted with polymerized epoxy polyester powders in an oven at 200 ° C.
Melamine chest of drawers on wheels with sides, white or gray colored bottom and top
Structure consisting of a melamine casing 18 mm thick silver or white; All components, base, hat, sides and back are thrusts together. The chest of drawers is available with three A6 drawers; Silver color drawer while the 18 mm thick melamine drawer is pushed into the drawer. The drawers slide on simple extraction type guides equipped with metal ball bearings, covered in nylon. Each drawer is equipped with a silver-colored plastic handle in the shape of a bow. It is equipped at the base with four swivel wheels Ø50. The chest of drawers is equipped with a Yale lock for simultaneous closing of the drawers and a folding key for anti-accident purposes.
