Structure
The wardrobes have a removable metal structure, broken down into the sides, hat, bottom, back, doors and internal shelves. All components are made from steel sheet (UNI 5866) and are assembled by interlocking and fixed by means of screws. The side is made from C-folded metal, ribbed towards the inside of the structure, on which a rack of slots is obtained for the joint of 4 top-tier hooks, positioned at the 4 corners of each floor. The tops (28 mm thick) are made with perimeter folds that allow the hanging of suspended folders at center distance 33.
ante
The doors can be hinged or sliding. In the hinged version they work on hinges positioned at the bottom and on the hat with a maximum opening of 110 ° (measures available length L 100/120 cm _ height h 69/90/155/200 cm). The sliding doors, on the other hand, move by means of ball trolleys that run on special guides obtained at the top of the cabinet, while at the bottom the door is inserted, by means of a plastic pin, in the joint obtained on the bottom of the structure (measures available 120/150/180 cm _ height h 69/90/155/200 cm).
Fitting
The internal tops rest on metal hooks that can be positioned over the entire height of the cabinet. They are designed to hang suspended folders.
Fixed shelf stiffening bar, movable shelf separator, removable hanger.
Removable top and frame (hanging folders).
Aluminum ladder.
Top of melamine top finish 18 mm thick.
All locks are equipped with a folding key (for accident prevention purposes) in duplicate each equipped with a plastic lock protection shell.
