STRUCTURE
Each closet has a demountable metal structure, which is made up of sides, top, bottom, back, doors, and internal shelves. All the components are obtained from a steel sheet (uni 5866), assembled by interlocking and fixed with screws. The side is made from a metal sheet bent to C, whose internal surface is ribbed, on which a rack of slots is obtained to join 4 retaining hooks, placed at the shelf’s corners. The shelves (28 mm thick) are made with perimeter folds, that allow the storage of hanging folders with center distance 33.
DOORS
Doors can be hinged or sliding. The hinged version works on hinged positioned at the bottom and at the top, having a maximum aperture of 110° (available in the length of 100/120 cm_ in the height of 69/90/155/200 cm). The sliding doors move on balls running on special guides, obtained at the closet’s top. At the bottom, the door is inserted in a slot by mean of a plastic pin (measures available Length 120/150/180 cm_ height 69/90/155/200 cm).
ACCESSORIES
Internal shelves rest on metal hooks that can be positioned along the entire closet’s height. They are designed to archive hanging folders.
Stiffening bar for fixed shelves, movable separator for shelves, pull-out coat hanger.
Pull-out shelf and frame (hanging folders).
Alluminium ladder.
Scala in alluminio.
Melamine top’s finishes, 18 mm thick.
All the lockers are equipped with folding keys (safety design), done in duplicate and both equipped with a plastic protective lock shell.
