CHANGING ROOMS’ STRUCTURE
Bearing structure: mono-block for 1, 2 and 3 places.
The various parts are structured by elements in pressed steel sheet (uni 5866) thickness 6/10.
The metal shelf is equipped with a rod for hangers and side hooks in the lower part.
DOORS
In 6/10 thick pressed sheet metal, they are reinforced on the inside by an anti-twisting rib, and they are equipped with ventilation slots and an umbrella stand with plastic drip tray.
The doors are mounted on an internal hinge with a visible pin to allow 180 ° opening, and they are equipped with a lock.
The finishing step is carried out with phospho-degreasing, drying, automatic application of epoxy-polyester powders and passage in an oven for cross-linking at 180 ° C.
BENCHES’ STRUCTURE
Bearing structure: tubular welded metal mono-block. Available in two length sizes: single (100 cm) and double (200 cm).
The seat is made with wooden slats fixed to the metal structure by means of screws.
The coat hanger backrest can be fixed to the base structure, and it can be completed with an upper bag holder compartment.
