Structure
The metal frame consists of two legs made from a thick sheet metal mold (3 mm) constrained by a central telescopic beam in sheet steel. The shape of the leg tapers from the floor to the floor, creating a figure called “stand” (available in h 74 and 98 cm). The depths proposed for the opposing double desk are respectively 125, 145 and 165 cm, a situation in which two desks facing each other share a single leg for the depth of the top.
At the point of contact with the floor, the legs are complete with manually adjustable plastic leveling feet.
work plan
Made of 25 mm thick melamine chipboard, bordered along the ABS perimeter.
Fitting
On the floor it is then possible to hook open boxes useful for archiving, built in melamine chipboard.
Then there are the front panels or partitions in melamine chipboard (thickness 18 mm) fixed as a clamp on the top.
The modesty panel or melamine chipboard skirt comes with special under-top brackets. Then there are interlocking side screens available in the top, which can be easily removed and positioned as needed thanks to a metal fork; They are made of melamine chipboard which can also be covered in fabric.
In the opposite configuration with double leg (depth 125, 145 and 165 cm) it is possible to position the central front partitions in chipboard (in the same finishes as the top), covered in fabric or in retro-enamelled etched glass White effect.
Notes
A load-bearing service cabinet consisting of a chest of drawers and two door modules is proposed. On request, the central compartment can be drilled to allow the rise / descent of cables and systems. Only the chest of drawers is equipped with a lock. The metal feet are in silver plastic.
Bench system is carried out by placing on a bench with 2 or 3 elements, on metal feet high from the ground, equipped modules (80cm module pitch) with different functions: seat cushion, magazine compartment, open container,
