Structure
Structure: the supporting structure, of the decentralized type, is made with an extruded aluminum profile with a semi-elliptical section of dimensions 40 x 30 mm, silver painted, which allows the insert and the fixing of the blades suitable for making the connections to the foot, below the floor and top in support of the upper shelf. The work surface can slide in the semi-elliptical section, guaranteeing its adjustment and fixing at different heights, from 720 to 800 mm. Further adjustment of the levels is allowed by the feet
Levelers, made of nylon filled with glass fiber, placed at the two points of contact on the floor.
work plan
Worktops: the worktops are made of melamine chipboard, 28 mm thick, sideways edged in ABS. The geometries of the floors create four modules: straight, convex arc, concave and 90 °. All modules can be used in combination with the others on one front, becoming right or left terminals, or on both sides becoming intermediate modules. The worktop has a total depth of 600 mm.
The upper shelves, always in 28 mm thick melamine edged in ABS, reflect the same principle of modularity of the work surfaces, differing from these for the depth which is equal to 330 mm.
The legs are bound to the work surfaces and shelves by means of the compasses specially positioned on the lower face.
The melamine finishes are all those marketed by Meco. In addition to the melamine finish, the upper shelves can be made of etched tempered glass or colored glass, 10 mm thick, resting on a 18 mm thick silver-colored subtop also bound to the leg by means of compasses.
Front: straight or curved panels according to the desired geometry, fixed to the semi-elliptical section leg by means of two joints in cast aluminum, silver painted, contrasted inside and outside the panel itself. The metal front panels are painted with epoxypolyester powders.
Each module is provided, in its use in the terminal position, both for the worktops, for the shelves or for the front panels, of terminal elements in silver-colored lacquered; They are removable in the event of a subsequent transformation of the terminal module into an intermediate one.
Electrification is guaranteed vertically by specially shaped plastic rings on the semi-elliptical section of the leg or by means of a vertebra for cables.
A “lowered” module without the upper shelf plan is also available, for the use of the disabled.
