SPHERA RECEPTION

METAL STRUCTURE METAL PANEL MELAMINE DOORS, TOP, BACK AND SIDE PANELS GLASS

STRUCTURE
Structure: the main structure is made of extruded aluminium with a semi-elliptical section, 40x30mm, silver finished; it allows the fixing of the beams that connect it to the feet, underneath the top and on the upper side to support the shelf.
The worktop can glide onto the semi-elliptical section and can be adjusted to different heights, from 720 to 800mm.
Another adjustment can be made thanks to the levelling feet, made of nylon and glass fibre and are placed on the ground.

WORKTOP
Worktop: it’s made of melamine chipboard, 28mm thick, with ABS edge.
There are four possible modules: straight, convex, concave and at 90°.
Each module can be put next to the other; the worktop has a final depth of 600mm.
The melamine upper shelves (28mm and ABS edge) follow the same prnciple as the worktop, but has a maximum depth of 300mm.
The legs are attached to the worktops and shelves thanks to the compasses put on the lower side.
The melamine finishings are all made by MECO.
The shelves can also be made of frosted tempered or colored glass, 10mm, standing on a silver undertop 18mm thick, also attached thanks to a compass.
Frontal: straight or curve panels, attached to the leg thanks to two aluminium joints, painted silver. These metal panels are finished with epoxy-polyester powders.
Each module is designated to have terminal silver laquer elements; they are anyway removable, in case a trasformation from end to middle module happens.
Cable rounting is garanteed thanks to the vertical holder or the plastic rings on the legs.
A lower module is also available, without the upper shelf, especially made for disabled people.

INFO

RELATED PRODUCTS

WE ARE

100% 
MADE IN ITALY

WE ARE
INTERNATIONAL

5000
PRODUCTIVE SQM

3D
WAREHOUSE